The DALY 100 BMS is a cutting-edge battery management system designed for Li-ion, LiFePO4, and LTO batteries. It supports configurations from 4s-8s to 8s-24s, offers Bluetooth monitoring, and handles currents up to 500A. Its active balancing, safety protocols, and compatibility with renewable energy systems make it ideal for EVs, solar storage, and industrial applications.
What Are the Best Eco-Friendly UPS Systems for Sustainable Energy Use?
What Safety Features Does the DALY 100 BMS Offer?
The system includes overvoltage/undervoltage protection, overcurrent shutdown, and thermal management. Its MOSFET-based design minimizes energy loss, while fault diagnostics alert users to issues like cell imbalance or connector failures. These features ensure compliance with international safety standards for industrial and residential use.
The DALY 100 BMS employs a multi-layered protection strategy that includes redundant voltage sensors and isolated communication channels. Its thermal runaway prevention system uses 4-point temperature monitoring with ±1°C accuracy, automatically throttling current when cell temperatures exceed 65°C. For high-risk environments, the BMS features arc fault detection that disconnects circuits within 15 milliseconds of identifying abnormal current spikes. These advanced safeguards make it suitable for marine applications and underground energy storage where failure risks must be minimized.
| Protection Type | Response Time | Operating Range |
|---|---|---|
| Overvoltage | <2ms | 0.5-5V/cell |
| Thermal Cutoff | <100ms | -20°C to 85°C |
| Short Circuit | <15ms | 0-500A |
What Maintenance Does the DALY 100 BMS Require?
Routine checks include firmware updates via the DALY app, cleaning terminal connections, and calibrating voltage sensors annually. The system self-tests balance resistors and MOSFET health. No physical adjustments are needed—its solid-state design ensures 50,000+ hour MTBF under standard operating conditions.
How Does the JK Active Balancer Optimize Battery Performance?
Maintenance cycles can be extended through the BMS’s predictive analytics feature, which uses historical performance data to recommend component inspections. The system’s self-diagnostic mode tests balance current efficiency monthly, automatically flagging resistors that drift beyond 5% tolerance. For industrial users, the modular design allows hot-swapping of communication modules without powering down the entire system. Annual maintenance should include torque verification on high-current busbars (recommended 4-6Nm) and visual inspection of isolation barriers in humid environments.
“The DALY 100’s scalability bridges a gap in modular energy storage. Its 24s support allows cascading for 800V EV architectures, while the 500A rating meets industrial UPS demands. The active balance topology is a game-changer—we’ve seen 40% fewer cell replacements in telecom backup systems using this BMS.” — Senior Engineer, Global Battery Solutions
FAQs
- Can the DALY 100 BMS Handle Supercapacitor Banks?
- Yes, when configured for 1.5-2.8V cells. Use the LTO preset and disable Coulomb counting in the app for capacitor-specific SOC tracking.
- Does It Support CAN Bus Integration?
- Via optional add-ons. The DALY CAN module (sold separately) enables J1939/MODBUS communication for automotive and industrial IoT systems.
- What Warranty Comes with the BMS?
- 3-year limited warranty covering manufacturing defects. Extended 5-year plans are available for commercial users with registered installations.