What Makes the Bosch BAT411 12V 3000mAh Battery a Top Replacement Choice?

The Bosch BAT411 12V 3000mAh battery is a high-performance lithium-ion replacement compatible with Bosch power tools like the PS20-2 and BAT412A/BAT413A models. It offers extended runtime, fast charging, and enhanced durability compared to older Ni-Cd batteries. Its compact design ensures seamless integration with tools, while advanced safety features prevent overheating and over-discharge.

Applications of Eve Batteries

How Do I Confirm Compatibility of the Bosch BAT411 with My Tool?

Check the tool’s model number against the BAT411’s compatibility list, including Bosch BAT412A, BAT413A, PS20-2, and D-70745GOP. Verify voltage (12V) and terminal alignment. Cross-reference OEM part numbers like 2607336013 or 2607336014. Third-party replacements must match physical dimensions and electrical specs to avoid damage.

When assessing compatibility, pay special attention to terminal configuration. Bosch’s 12V batteries use a unique 4-pin design with specific polarity arrangements. Mismatched terminals can cause arcing or permanent tool damage. Use calipers to measure battery dimensions: the BAT411 measures 90mm x 70mm x 35mm. For legacy tools, check if the battery tray has clearance for the lithium-ion pack’s slightly larger profile compared to Ni-Cd models. Consider purchasing a compatibility adapter for older systems, though this may reduce ergonomic benefits.

Tool Model	Part Number	Voltage Verification
PS20-2	0603972012	12V DC Input
BAT412A	2607336013	10.8V-12V Range
BAT413A	2607336014	12V Exact

What Are the Key Features of the Bosch BAT411 Lithium-Ion Battery?

The BAT411 uses lithium-ion cells for 3000mAh capacity, 30% longer runtime than standard 2000mAh batteries. It supports 45-minute fast charging, 500+ charge cycles, and a fuel gauge for charge monitoring. Built-in thermal sensors and a PCB protect against overcurrent, short circuits, and deep discharge.

How Eve Batteries Work

How Long Does the Bosch BAT411 Battery Last on a Single Charge?

Runtime depends on tool load: 20-30 minutes for high-demand tools like reciprocating saws, 45-60 minutes for drills. The 3000mAh capacity outperforms older 1.5Ah/2.0Ah batteries. Avoid full discharges; partial charging extends lifespan.

What Steps Are Required to Replace a Bosch 12V Tool Battery?

1. Turn off and cool the tool. 2. Slide the battery release latch. 3. Remove the old battery. 4. Align terminals on the BAT411. 5. Insert until it clicks. 6. Charge fully before first use. Dispose of old batteries at certified e-waste centers.

Why Is Proper Storage Critical for Maximizing Battery Lifespan?

Store at 50-70% charge in dry, 10-25°C environments. Avoid extreme temperatures: cold reduces ion mobility, heat accelerates degradation. Use original cases to prevent terminal contact with metal objects. Re-calibrate every 3 months by fully discharging/recharging.

Lithium-ion cells experience permanent capacity loss when stored at full charge due to electrolyte oxidation. For seasonal storage, discharge batteries to 3.8V per cell (approximately 60% charge state). Humidity above 65% can corrode internal protection circuits—consider using silica gel packs in storage containers. Below freezing temperatures (<0°C) may cause electrolyte crystallization, requiring gradual warming before use. Always perform a capacity test after prolonged storage using a dedicated battery analyzer.

Storage Condition	Recommended Range	Maximum Duration
Temperature	15°C-25°C	6 months
Charge Level	40%-60%	Indefinite*
Humidity	<50% RH	N/A

How Does the Bosch BAT411 Compare in Cost to Third-Party Alternatives?

OEM Bosch batteries cost $50-$75 but guarantee compatibility and warranty. Third-party options range from $25-$45 but risk lower cell quality. For professional use, OEM is recommended. Hobbyists may opt for UL-certified third-party packs with matching specs.

What Are the Best Alternatives to the Bosch BAT411 Battery?

Top alternatives include DeWalt DCB120, Makita BL1013B, and Powerextra 12V 3000mAh. Ensure terminal polarity matches Bosch’s unique configuration. Some adapters allow using non-Bosch batteries but may void warranties.

What Environmental Impact Do Lithium-Ion Tool Batteries Have?

Lithium-ion batteries contain cobalt and lithium, requiring responsible recycling. Bosch’s ReVolve program offers free recycling. Improper disposal leads to soil/water contamination. Third-party recyclers must meet R2 or e-Stewards standards.

Expert Views

“The BAT411 represents Bosch’s shift to lithium-ion dominance in compact tools. Its 21700 cell format balances energy density and durability—critical for tradespeople. However, users must avoid counterfeit batteries; we’ve seen a 40% failure rate in non-OEM packs within 6 months.” – Power Tools Industry Analyst

Conclusion

The Bosch BAT411 12V 3000mAh battery combines longevity, safety, and performance, making it ideal for both professionals and DIYers. Prioritize OEM units for heavy use and follow storage guidelines to maximize ROI. Always verify compatibility and recycle responsibly.

FAQs

Q: Can I use the BAT411 with non-Bosch 12V tools?

A: Only if terminals and voltage match; most brands use proprietary connectors.

Q: Does the BAT411 work with older Bosch chargers?

A: Yes, if the charger supports lithium-ion (Li-ion) and 12V input.

Q: How do I reset a malfunctioning BAT411?

A: Press the fuel gauge button for 10 seconds. If unresolved, contact Bosch support.